SCLP-NRP2-RSA - LED Smart Cap TPMS for Motorcycles w/ RSA 1st Gen
Two (2) Generation 1 (Rev. 1) Ride-On LED Smart Cap TPMS sensors and a certificate for FREE One Year Roadside Assistance. NO RETAIL PACKAGING/NO BLISTER PACKAGING.
Availability: In Stock
Two (2) Generation 1 (Rev. 1) LED Smart Caps TPMS sensors without blister packaging for motorcycles, scooters, mopeds, electric bikes, a tester tool, one anti-theft key, and a registration card for a Free One Year Roadside Assistance Membership (Available in the USA, Canada, and Puerto Rico). The Ride-On Smart Cap led valve cap is a must for people that want to make sure that their tires are properly inflated. Once installed the Smart Valve Cap will automatically calibrate to your desired tire pressure from 10 to 70 psi. The Smart Cap will alert you if the tire pressure drops by 4 psi (+/- 10%). The bright red blinking led light will continue to warn you of low tire pressure for more than a month. Great compliment to Ride-On TPS Tire Sealant and Balancer.
* One year Roadside Assistance membership (RSA) in the USA, Canada and Puerto Rico (Motorcycle RSA can't be used on Autos/SUVs)
* Easy to Install - Simply screw valve caps onto tire valve stems.
CAUTION: We highly recommend that the LED Smart Cap TPMS sensors be installed on metal valve stems. Metal valve stems are recommended because rubber valve stems can flex more, become brittle, or fatigue and crack over time. If you chose to use a rubber valve stem instead of a metal valve stem, you bear any and all responsibility should your rubber valve stem crack or fail. We as the manufacturer bear no responsibility. After installation, rotate the tire to make sure that the LED Smart Cap TPMS does not come in contact with any brake or suspension components (flex valve stem side to side and allow a minimum of ¼" clearance). The valve stem and LED Smart Cap should NOT protrude beyond the tire where they may come in contact with curbs or other objects.