Pumps, Tools, Supplies
Ride-On TPS Installation Pumps, Tools, Supplies
HP-100 is a metered tire sealant 5-gallon pail Hand Pump with a quick connect stem chuck. This tire sealant pump is supplied with a dosage table and installation instructions.
HP-300 is a metered 5-gallon pail Hand Pump with a quick connect valve stem chuck.
HP-400 is a metered 55-gallon Hand Pump with a quick connect valve stem chuck.
HP-500 is a metered 55-gallon tire sealant (tyre sealant) Hand Pump with a quick connect valve stem chuck.
Replacement Handle Only.
The HP-300 Handle is a complete replacement handle for the 5-gallon pail metered hand pump. The handle is supplied with a 6-foot installation hose and quick-connect chuck.
The HP-400 Handle is a complete replacement handle for the 55-gallon drum metered hand pump. The handle is supplied with a 10-foot installation hose and quick-connect chuck.
You can refurbish the Ride-On TPS metered Hand Pumps by replacing the only wear item, the two o-rings. These EPDM replacement o-rings are internally lubricated and specifically engineered for compatibility with the Ride-On TPS tire sealants. When replacing o-rings, initially lubricate o-rings with a small amount of silicone grease. These o-rings are designed to self lubricate during normal use. Do not use any petroleum based lubricants (grease, Vaseline, motor-oil, etc.). This kit is supplied with two o-rings.
Everything needed to install Ride-On TPS in single and dual wheel axels is included with the optional pump tool kit (standard with HP-300 and HP-400). The tool kit is supplied with 2 valve core removal tools, 2 injection adapter tools, and a 40-page Dosage Table and Installation Instructions Manual.
Ride-On TPS tire marking o-rings. Slip these o-rings over the tire valve stems to easily identify individual tires that have been treated with Ride-On. Using these o-rings allows drivers and service personnel to know which tires have been treated with Ride-On. Ideal for large fleets and OEM applications. Quantity per pack: 20.
Ride-On TPS vehicle stickers. These stickers are used to identify vehicles that have been treated with Ride-On. Apply this sticker above the axle to easily identify vehicles that have been treated. Using this sticker allows drivers and service personnel to know which tires have been treated with Ride-On. Ideal for large fleets and OEM applications. Sticker dimensions: 3" x 5", 500 Stickers per roll.
HP-1000T is a metered 5-gallon hand pump with all the adapters needed to also be used with our 55-gallon drums. This complete pump will include all the tools including the motorcycle and car connection quick connect chucks, small and extended valve core removal tools and chucks for installation into dual wheel assemblies.