LED Tire Pressure Monitoring valve caps for autos, suvs, vans, commercial vehicles, fleets, tractor-trailers, etc.
The Ride-On Smart Cap led valve cap is a must for people that want to make sure that their tires are properly inflated. Once installed the Smart Valve Cap will automatically calibrate to your desired tire pressure from 10 to 70 psi. The Smart Cap will alert you if the tire pressure drops by 4 psi (+/- 10%). The bright red blinking led light will continue to warn you of low tire pressure for more than three weeks. Great compliment to Ride-On TPS Tire Sealant and Balancer.
CAUTION: We highly recommend that the LED Smart Cap TPMS sensors be installed on metal valve stems. Metal valve stems are recommended because rubber valve stems can flex more, become brittle, or fatigue and crack over time. If you chose to use a rubber valve stem instead of a metal valve stem, you bear any and all responsibility should your rubber valve stem crack or fail. We as the manufacturer bear no responsibility. After installation, rotate the tire to make sure that the LED Smart Cap TPMS does not come in contact with any brake or suspension components (flex valve stem side to side and allow a minimum of ¼" clearance). The valve stem and LED Smart Cap should NOT protrude beyond the tire where they may come in contact with curbs or other objects.
4 Pack of Ride-On Generation 2 LED Smart Cap TPMS Ver. 2.
Bolt on valve stem extension for inside wheel of a dual wheel application.
This Demo tank and regulator makes it very easy to test to see if an LED Smart Cap TPMS sensor is properly working and calibrated.
The LED Smart Cap Check tool is a flow through valve cap that allows you to easily check to see if your Smart Cap works.